R/O Shops, 9-19 Manor Green
Road, Epsom,
Surrey KT19 8RA
Installation Instructions gx sTOWAWAY
1605-3 14/03/01
Heat Bank Thermal Store System Stowaway advanced F+E Single Heat Exchanger (30 ltr/min) Indirect 40mm Foam Insulation High duty primary coil Fitted Cylinder Thermostat (Only) All fitted controls are wired Manual Fill - No Overflow Thermostatic Blending Valve 22mm Backup Immersion Heater Low Water Level Indicator Cased
1 Integral Expansion Vessel (Unpressurised) 2 Plate Heat Exchanger 3 Heat Exchanger Pump 4 Flow Switch 6 Manual Air Vent 7 Automatic Air Vent 8 Integral Overflow Chamber 9 Store Filling Point 11 Y-Pattern Strainer (supplied loose) 13 Connection to Expansion Vessel 14 Immersion Heater 3kW Incaloy with Stat 16 Cold Mains In, 22mm 17 Hot Mains Out, 22mm 18 Drain Cock 21 Flow to Primary Coil 22 Return from Primary Coil 38 Cylinder Immersion Thermostat 39 White Coated Steel Casing 40 Tight Fitting Lid 42 Wiring Centre 54 Filling Loop (disconnect after use) 55 Water Level Switch 56 Manual Water Level Test and Drain 66 Overfill Drain Cock
Heat Bank Thermal Store System 